LIQUIPRO NZ
THE DI-TUBE 2.0
DI-TUBE 2.0 is the easiest and quickest way to remove minerals from your water, leaving you with pure, deionised water for all your soft water needs.
Completely plug & play
NZ Made
User friendly
VIEW PRODUCT INFORMATION
ORDER ONLINE NOW
LIQUIPRO NZ
DI-PACKAGE 2.0
FULL PACKAGE
$199
+ GST + Shipping
The NZ Made DI-TUBE 2.0 completely removes the minerals in your tap water to leave completely pure, deionised water. The DI-TUBE 2.0 was designed with the intentions of making the process simple, easy and more importantly, good for the environment.
(DITUBE + MOUNTING + CONNECTION KIT)
SKU: DI-PACKAGE 2.0
Simple to Use System
ECO Friendly
Refillable & Reuseable
Connects to NZ taps
LIQUIPRO NZ
REFILL BOX 2.0
$99
+ GST + Shipping
3 x refill resin packs for DI-TUBE 2.0 - is the indicating resin that turns from Blue to Brown/Yellow when exhausted. All 3 Bags are used to refill the DiTube with a little left over. We've designed this to make the process simple, easy and more importantly, good for the environment.
IMPORTANT: All 3 Bags are used to refill the DiTube
SKU: MBR-REFILL
Simple refill solution
ECO Friendly
"How To" Instructions videos
Install the DI-TUBE 2.0
Connect adaptor (7) to existing tap
Connect 6mm tubing (6) to the tap fitting tap adaptor (7).
Connect straight push-connector (5) to the 6mm tubing (6)
With the empty cartridge you can refill with the new resin.
Finally, run tap for 15 sec. Ready for use.
Refill the DI-TUBE 2.0
Remove canister lid (2A) from canister body (2B).
With the black mesh bag provided, place mesh bag over tube (2B).
Empty resin in to the mesh bag and run water through the cartridge.
With the empty cartridge body (2b) you can refill with the new resin before placing cartridge lid back on (2a).
Finally, dispose exhausted resin in to the rubbish bin. (DO NOT RECYCLE)
Installing the
new Tap Connector
DITUBE 2.0 to
the Old Mounting Kit
Refilling MBR-828
All 3 bags are used to refill DiTube
Remove (2A) from (2B).
With the black mesh bag provided, place mesh bag over tube (2B).
Empty resin in to the mesh bag and run water through the cartridge.
With the empty cartridge body (2b) you can refill with the new resin (all 3 bags). Replace cartridge lid back on (2a).
Finally, dispose resin in the rubbish bin.
Contact us
© Liquipro NZ. All rights reserved.
DI-TUBE 2.0 Installation
Connect adaptor (7) to existing tap
Connect 6mm tubing (6) to the tap fitting tap adaptor (7).
Connect straight push-connector (5) to the 6mm tubing (6)
With the empty cartridge you can refill with the new resin.
Finally, run tap for 15 sec. Ready for use.